   |
Nylon Putting Greens
To create a ball speed that is required of tour greens, you need to fill the turf fibers with sand and top dress right up to the top of the fibers. At that point, you are putting almost entirely on sand and not the fibers. In time, the sand will settle or wash out, and your sand-filled green will become much slower. Improve your golf game. Cp and putt your way to lower scores. Why travel to the golf course or mini putt every time you want to practice putting? The Mirage Tour-Putt surface has Stimp speeds comparable to most PGA greens, without using deep sand infill or top dressings. Our new turf fibers have been manufactured to stand up naturally, and our turf has virtually no grain, thus the ball rolls the same in all directions. The tips of the fibers have been bent to simulate the true roll of a real bent grass green. To date, most synthetic back yard putting surfaces are installed using several inches and layers of sand fill to make the grass fibers stand up, thus causing the putting surface to become very fast. These surfaces require periodic broom sweeping to keep the fibers upright, and water-rolling to keep the sand level. Most of these synthetic turf surfaces have a grain pattern that runs one way throughout the carpet, making the ball skip or hop across the grain; these sand-filled greens also need periodic sand-fill and expensive top dressing. With the new Mirage Tour Putt Turf System, there is no need for deep sand-fill or top dressing. Our new turf is designed off the shelf to putt just like a Tour Green. With the new Mirage Tour Putt Turf System, there is no need for deep sand-fill or top dressing. Our new turf is designed off the shelf to putt just like a Tour Green. Most of these synthetic turf surfaces have a grain pattern that runs one way throughout the carpet, making the ball skip or hop across the grain; these sand-filled greens also need periodic sand-fill and expensive top dressing. To create a ball speed that is required of tour greens, you need to fill the turf fibers with sand and top dress right up to the top of the fibers. At that point, you are putting almost entirely on sand and not the fibers. In time, the sand will settle or wash out, and your sand-filled green will become much slower. Just give us a call and one of our representatives will bring our putting surface right to your location, so you can actually putt on it. Once you have putted on our Mirage Putting Green, you will be convinced, it is the most realistic maintenance-free synthetic putting surface in the world. To date, most synthetic back yard putting surfaces are installed using several inches and layers of sand fill to make the grass fibers stand up, thus causing the putting surface to become very fast. These surfaces require periodic broom sweeping to keep the fibers upright, and water-rolling to keep the sand level. To create a ball speed that is required of tour greens, you need to fill the turf fibers with sand and top dress right up to the top of the fibers. At that point, you are putting almost entirely on sand and not the fibers. In time, the sand will settle or wash out, and your sand-filled green will become much slower. Just give us a call and one of our representatives will bring our putting surface right to your location, so you can actually putt on it. Once you have putted on our Mirage Putting Green, you will be convinced, it is the most realistic maintenance-free synthetic putting surface in the world.Nylon Putting Greens, indoor outdoor putting green, residential putting green, artificial putting green, artificial turf for putting green, florida putting green Nylon Putting Greens available at usaputting.com by clicking above. Reciprocal Links: Nylon Putting Greens Nylon Putting Greens Nylon Putting Greens Nylon Putting Greens Nylon Putting Greens affordable search engine optimization front page web hosting |